[LinuxCNC/linuxcnc Issue#38] ja: wonky keyboard jogging in Axis

I’m testing with joints_axes11 (0199e98adf). I’m using Axis with a 4-joint, 3-axis gantrykins config (J1 and J3 are my gantry).

Start LinuxCNC, home, switch to World mode.

Use the keyboard to jog one axis (continuous), then push a key for jogging another axis. The first jogging axis stops jogging (which is wrong, it should continue to jog).

Then when you release the first axis’ jog key, the second (jogging) axis stutters but continues to jog.

It does not seem to matter which axes you jog, they all behave like this.