[LinuxCNC/linuxcnc Issue#334] dependencies for MINT 18.2 are not reported corect About GRBL HAL

Issue #334 | 状态: 已关闭 | 作者: gmoccapy | 创建时间: 2017-10-01

On current master and:
MINT 18.2 ‘Sonja’
Cinnamon 64-bit
with Kernel:
4.10.0-28-generic

I did:
“cd sudo apt-get install git git-gui git clone https://github.com/LinuxCNC/linuxcnc.git linuxcnc-dev sudo apt-get update cd /linuxcnc-dev/debian ./configure uspace

cd .. dpkg-checkbuilddeps`and installed the mentioned dependencies with:`sudo apt-get install build-essential debhelper libudev-dev libxenomai-dev tcl8.6-dev tk8.6-dev libreadline-gplv2-dev asciidoc dblatex dvipng graphviz groff inkscape source-highlight texlive-font-utils texlive-lang-cyrillic texlive-lang-french texlive-lang-german texlive-lang-polish texlive-lang-spanish w3c-linkchecker python-tk libxmu-dev libglu1-mesa-dev libgl1-mesa-dev libboost-python-dev libmodbus-dev libusb-1.0-0-dev`went on with:`cd src ./autogen.sh ./configure --enable-simulator“
and got missing dependencies of:
bwidget
libtk-img
tclx

after finishing with make and sudo make setuid and rip-environment I was not able to start hal_gremlin based GUI’s as python-gtkglext1 was also missing.

I am not sure, where to add that dependencies or even if I am allowed to.
Any help appreciated.

Norbert

#1 – jepler 于 2017-10-01

You are confusing the build dependencies of LinuxCNC with the runtime dependencies of LinuxCNC. There are some dependencies that are required only at runtime, not when building the package. dpkg-checkbuilddeps (and related programs such as mk-build-deps) only install build-time dependencies. We can’t change this, it’s a part of how Debian works.

I see we do mention dpkg-checkbuilddeps in the documentation, please feel free to offer pull requests that improve the documentation.

原始Issue: https://github.com/LinuxCNC/linuxcnc/issues/334

评论 (1)