[Grbl_Esp32 Issue#6] Suppress esp32 RTOS Startup text About GRBL HAL

Issue #6 | 状态: 已关闭 | 作者: unixbigot | 创建时间: 2018-07-28

You write in the readme that you want to suppress the esp32 boot messages to avoid confusing senders. You can do this in the standard Arduino/esp build by pulling gpio15 low at startup. I’ll test this today to confirm my recollection of the pin number, and update.

#1 – buildlog 于 2018-07-29

I think you are right. Someone else mentioned that.

Upon further thinking, this is probably not an issue. That text will have passed before anything will have connected.

#2 – buildlog 于 2018-07-29

I think this should be closed until someone has an actual error associated with it.

#3 – unixbigot 于 2018-08-04

Just tested, yes, tying GPIO15 low suppresses the RTOS boot text.

原始Issue: https://github.com/bdring/Grbl_Esp32/issues/6

评论 (3)