[Grbl_Esp32 Issue#482] Wiki issue regardign BESC setup About GRBL HAL

Issue #482 | 状态: 已关闭 | 作者: BogdanTheGeek | 创建时间: 2020-07-18

Hi, I cant seem to figure out how to setup my machine to use an ESC for spindle.
which Defines should I have in m machine file?
https://github.com/bdring/GrblEsp32/wiki/Spindle-Types#spindletype_besc
here it says to use SPINDLEPWMPIN, but for the rest it is SPINDLEOUTPUTPIN
Also, should the machine type be BESC or LASER?

EDIT:
#define SPINDLETYPE SPINDLETYPE_BESC
#define SPINDLEOUTPUTPIN GPIONUM15 // labeled SpinPWM
these worked for me, so i guess the issue is about the wiki

#1 – bdring 于 2020-07-18

It should be

#define SPINDLETYPE SPINDLETYPE_BESC

Fixed the wiki

#2 – BogdanTheGeek 于 2020-07-18

> It should be
>
> #define SPINDLETYPE SPINDLETYPE_BESC
>
> Fixed the wiki

https://github.com/bdring/Grbl_Esp32/wiki/BESC-Spindle-Feature#adding-the-feature
this also talks about addescspindle.h
What is that about? is it still relevant?

#3 – bdring 于 2020-07-18

Thanks. That page pre-dates the use of standardized spindle classes. It has some good info, so I cleaned it up and cross referenced the pages.

#4 – BogdanTheGeek 于 2020-07-18

Thanks!

On Sat, 18 Jul 2020, 19:35 bdring, wrote:

> Thanks. That page pre-dates the use of standardized spindle classes. It
> has some good info, so I cleaned it up and cross referenced the pages.
>
> —
> You are receiving this because you authored the thread.
> Reply to this email directly, view it on GitHub
> <https://github.com/bdring/Grbl_Esp32/issues/482#issuecomment-660523193>,
> or unsubscribe
> <https://github.com/notifications/unsubscribe-auth/ACDKK6WOUN4F3UCNH5HCXF3R4HTPZANCNFSM4O7ZIHBQ>
> .
>

原始Issue: https://github.com/bdring/Grbl_Esp32/issues/482

评论 (4)