This got me super excited! I installed your firmware on the ESP32 with no issues. And have access to the web interface! All is great! Where I got stock is connecting it to BCNC over WiFi. Could you help me with the setting I have to set on the ESP32 and the address I need to enter in BCNC?
Telnet? I’m not much of a network guy! Don’t know what to do!
Thanks!!
– Blaise
![[gnea/grbl-Mega Issue#1] $ command extentions](https://www.grblhal.com/wp-content/themes/gitphp/timthumb.php?src=https://www.grblhal.com/wp-content/themes/gitphp/assets/img/pic/6.jpg&h=110&w=185&q=90&zc=1&ct=1)
![[gnea/grbl-Mega Issue#2] Better interrupt priorities](https://www.grblhal.com/wp-content/themes/gitphp/timthumb.php?src=https://www.grblhal.com/wp-content/themes/gitphp/assets/img/pic/10.jpg&h=110&w=185&q=90&zc=1&ct=1)
![[gnea/grbl-Mega Issue#3] ATMega16U2 virtual com port on ATMega2560](https://www.grblhal.com/wp-content/themes/gitphp/timthumb.php?src=https://www.grblhal.com/wp-content/themes/gitphp/assets/img/pic/7.jpg&h=110&w=185&q=90&zc=1&ct=1)
#1 – blaisebarrette 于 2020-05-19
Never mind, I got it working!
I’ll write my solution here if other slower people like me end up here!
In BCNC, enter socket://ipAdressOfYourEsp32:TelnetPort
Exemple: socket://192.168.1.75:23
You can also use socket://hostName:TelnetPort
Exemple: socket://grbl_esp.local:23
Hope this helps!