[Grbl_Esp32 Issue#405] ESP-Restart after pressing hold and then stop during a job

#1 – bdring 于 2020-05-11

What program and method are you using to pause and stop the running job?

#2 – BlueOrangeLive 于 2020-05-11

I used the ESP3D Web UI in the browser.
Your test files on SD card and started from there.
Then at the top of the menu Grbl in the line with RUN “II” and then the red button. Then the connection error occurs.
In the No Laser Mode the file treelasermode.nc then shows Error 20 after the start, that’s OK, but the process bar remains at the top. The red button under must then still be pressed.

#3 – BlueOrangeLive 于 2020-05-11

[MSG:Local access point GRBL_ESP started, 192.168.0.1]
[MSG:Captive Portal Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]

Grbl 1.2a [‘$’ for help]

Here I pressed stop

Guru Meditation Error: Core 0 panic’ed (LoadProhibited). Exception was unhandled.
Core 0 register dump:
PC : 0x400e0a5a PS : 0x00060a30 A0 : 0x800de278 A1 : 0x3ffd2e30
A2 : 0x3ffc6aa8 A3 : 0x3ffc6af4 A4 : 0x00000000 A5 : 0x3ffc5e90
A6 : 0x3ffc5a10 A7 : 0x00000001 A8 : 0x00000001 A9 : 0x3ffd2e10
A10 : 0x3f000000 A11 : 0x00000018 A12 : 0x3ffc6494 A13 : 0x3ffba750
A14 : 0x00000000 A15 : 0x00000000 SAR : 0x0000000a EXCCAUSE: 0x0000001c
EXCVADDR: 0x0000001c LBEG : 0x4000c2e0 LEND : 0x4000c2f6 LCOUNT : 0xffffffff

Backtrace: 0x400e0a5a:0x3ffd2e30 0x400de275:0x3ffd2ea0 0x400de2a7:0x3ffd2ec0 0x400de867:0x3ffd2ef0 0x400e1917:0x3ffd2f10 0x400dc44f:0x3ffd2f30 0x400dfdc5:0x3ffd2f50 0x400dffe2:0x3ffd2f70 0x4008ef2d:0x3ffd2f90

Rebooting…
ets Jun 8 2016 00:22:57

rst:0xc (SWCPURESET),boot:0x13 (SPIFASTFLASH_BOOT)
configsip: 0, SPIWP:0xee
clkdrv:0x00,qdrv:0x00,ddrv:0x00,cs0drv:0x00,hddrv:0x00,wpdrv:0x00
mode:DIO, clock div:1
load:0x3fff0018,len:4
load:0x3fff001c,len:1216
ho 0 tail 12 room 4
load:0x40078000,len:9720
ho 0 tail 12 room 4
load:0x40080400,len:6352
entry 0x400806b8

[MSG:Grbl_ESP32 Ver 1.2a Date 20200507]
[MSG:Compiled with ESP32 SDK:v3.2.3-14-gd3e562907]
[MSG:Using machine:Test Drive – Demo Only No I/O!]
[MSG:Axis count 3]
[MSG:Timed Steps]
[MSG:No spindle]

[MSG:Client Started]
[MSG:Connecting Negrui2018]
[MSG:Connecting.]
[MSG:Connecting..]
[MSG:Connected with 192.168.178.48]
[MSG:Start mDNS with hostname:http://grblesp.local/%5D
[MSG:SSDP Started]
[MSG:HTTP Started]
[MSG:TELNET Started 23]

Grbl 1.2a [‘$’ for help]

I can understand English well, but I cannot write. Google writes for me.