[Grbl_Esp32 Issue#277] Use ac servo motors About GRBL HAL

Issue #277 | 状态: 已关闭 | 作者: CNCmaisdeMILL | 创建时间: 2019-11-01

Hello I would like to know what is the maximum output frequency on the steppe and dir pins For me to use high resolution drivers

#1 – bdring 于 2019-11-01

With the current settings, you can do about 120khz.

It might be able to go faster, but you would need to look at changing the actual step pulse durations, off times, etc.

评论 (1)