[Grbl_Esp32 Issue#262] Relating auto level with your control board About GRBL HAL

Issue #262 | 状态: 已关闭 | 作者: smarta1980 | 创建时间: 2019-10-23

Sir, bdring
I have a question relating auto level with your control board :
is it auto level for one point or auto level for multi points
I asked this question because sometimes the surface maybe curve slightly

#1 – bdring 于 2019-10-23

There is no “autolevel”. There is probing of a single point. Probing is supported in the WebUI and many gcode senders.

Some senders will probe a grid and modify the gcode to compensate for an uneven surface. bCNC is a good one.

#2 – smarta1980 于 2019-10-23

so how to make grid probing?

#3 – bdring 于 2019-10-23

Search Youtube for “bCNC Autolevel”. Like this one

bCNC has a very old school interface, but the features are great!

#4 – PolSerg 于 2020-10-26

Maybe you know an analogue for android?

原始Issue: https://github.com/bdring/Grbl_Esp32/issues/262

评论 (4)