[Grbl_Esp32 Issue#146] bCNC Issues About GRBL HAL

Issue #146 | 状态: 已关闭 | 作者: bdring | 创建时间: 2019-05-13

Someone using the bCNC sender reported connection issues. I was able to confirm that and found (2) issues.

First

It will not connect if the $10=x reporting mask is such that x is not an odd number. The default is 2.

Does anyone have a problem changing that to 1 or 3?

Second

It asks for the gcode modal status with $G after some commands are sent. Grbl_ESP32 is sending…

[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F:0 S0.000]

It should have been…

[GC:G0 G54 G17 G21 G90 G94 M5 M9 T0 F0 S0.000]

There was a colon after the F.

bCNC locks up without reporting an error when that happens.

I will fix that with a pull request soon.

#1 – AbySet 于 2019-05-21

You guys using bluetooth or wifi to connect ?

#2 – bdring 于 2019-05-21

Both…Bluetooth is better for streaming and wifi is better for the WebUI and SD card

#3 – CNCmaisdeMILL 于 2019-11-02

a friend is having this problem, i hope for a future fix because bcnc is the best sender.

#4 – bdring 于 2019-11-02

The problems mentioned on this Closed Issue have been fixed. It works fine for me now. Please open a new issue using the bug issue template. Provide all versions numbers and describe exactly what the symptoms are.

原始Issue: https://github.com/bdring/Grbl_Esp32/issues/146

评论 (4)