[grbl Issue#1010] No lift About GRBL HAL

Issue #1010 | 状态: 已关闭 | 作者: diydez | 创建时间: 2016-06-07

My CNC does not raise to the first cut, it drags along the board and messes up my work. Any idea why that happens?

#1 – chamnit 于 2016-06-07

@diydez : Decrease your Z-axis acceleration so it doesn’t stall when raising the z-axis against its own weight.

#2 – jahnj0584 于 2016-06-07

set a safe Z level in your CAM, or make the material thicker, and start the bit Xmm off the spoil board.

评论 (2)