[FluidNC PR#1590] TLO works on all axes About GRBL HAL

Issue #1590 | 状态: 已关闭 | 作者: bdring | 创建时间: 2025-10-07

– Previously only worked one one axis determined by #define in config.h
– TLO is not saved to NVS.

#1 – bdring 于 2025-10-07

Here is some test data.

“Grbl 3.9 [FluidNC v3.9.9 (TLOallaxes-d451ee66-dirty) (wifi) '$' for help] [MSG:INFO: ALARM: Unhomed] ALARM:14 $H [MSG:Homed:Z] [MSG:Homed:XY] ok $# [G54:61.000,65.000,-10.000] [G55:0.000,0.000,0.000] [G56:0.000,0.000,0.000] [G57:0.000,0.000,0.000] [G58:0.000,0.000,0.000] [G59:0.000,0.000,0.000] [G28:0.000,0.000,0.000] [G30:0.000,0.000,0.000] [G92:0.000,0.000,0.000] [TLO:0.000,0.000,0.000] ok G0x0y0 ok G43.1 X10 ok G0 x0 ok $# [G54:61.000,65.000,-10.000] [G55:0.000,0.000,0.000] [G56:0.000,0.000,0.000] [G57:0.000,0.000,0.000] [G58:0.000,0.000,0.000] [G59:0.000,0.000,0.000] [G28:0.000,0.000,0.000] [G30:0.000,0.000,0.000] [G92:0.000,0.000,0.000] [TLO:10.000,0.000,0.000] ok G43.1 Y20 Z2 ok g0 x0 z0 ok $# [G54:61.000,65.000,-10.000] [G55:0.000,0.000,0.000] [G56:0.000,0.000,0.000] [G57:0.000,0.000,0.000] [G58:0.000,0.000,0.000] [G59:0.000,0.000,0.000] [G28:0.000,0.000,0.000] [G30:0.000,0.000,0.000] [G92:0.000,0.000,0.000] [TLO:10.000,20.000,2.000] ok G49 ok $# [G54:61.000,65.000,-10.000] [G55:0.000,0.000,0.000] [G56:0.000,0.000,0.000] [G57:0.000,0.000,0.000] [G58:0.000,0.000,0.000] [G59:0.000,0.000,0.000] [G28:0.000,0.000,0.000] [G30:0.000,0.000,0.000] [G92:0.000,0.000,0.000] [TLO:0.000,0.000,0.000] ok G0x0y0z0 ok“

原始Issue: https://github.com/bdring/FluidNC/pull/1590

评论 (1)