[FluidNC Issue#1526] Problem: Problem with special characters in the SSID

Wiki Search Terms

http://wiki.fluidnc.com/en/features/wifi-quick-start

Controller Board

MKS_DLC32

Machine Description

Old GEEETECH A20 with a NEW Board and a Spindel as engraver

Input Circuits

Configuration file

Not usefull for my issue

Startup Messages

�[MSG:INFO: uart_channel0 created]
[MSG:RST]
[MSG:INFO: FluidNC v3.9.7 https://github.com/bdring/FluidNC]
[MSG:INFO: Compiled with ESP32 SDK:v4.4.7-dirty]
[MSG:INFO: Local filesystem type is littlefs]
[MSG:INFO: Configuration file:config.yaml]
[MSG:INFO: Machine CNC alter GEEETECH A20]
[MSG:INFO: Board MKS-DLC32]
[MSG:INFO: I2SO BCK:gpio.16 WS:gpio.17 DATA:gpio.21Min Pulse:2us]
[MSG:INFO: SPI SCK:gpio.14 MOSI:gpio.13 MISO:gpio.12]
[MSG:INFO: SD Card cs_pin:gpio.15 detect:gpio.39 freq:8000000]
[MSG:INFO: Stepping:I2S_STATIC Pulse:6us Dsbl Delay:0us Dir Delay:10us Idle Delay:254ms]
[MSG:INFO: Axis count 3]
[MSG:INFO: Shared stepper disable I2SO.0]
[MSG:INFO: Axis X (0.000,250.000)]
[MSG:INFO:   Motor0]
[MSG:INFO:     stepstick Step:I2SO.1 Dir:I2SO.2:low Disable:NO_PIN]
[MSG:INFO:  Neg Limit gpio.36]
[MSG:INFO: Axis Y (0.000,250.000)]
[MSG:INFO:   Motor0]
[MSG:INFO:     stepstick Step:I2SO.5 Dir:I2SO.6 Disable:NO_PIN]
[MSG:INFO:  Neg Limit gpio.35]
[MSG:INFO: Axis Z (0.000,250.000)]
[MSG:INFO:   Motor0]
[MSG:INFO:     stepstick Step:I2SO.3 Dir:I2SO.4 Disable:NO_PIN]
[MSG:INFO:  Neg Limit gpio.34]
[MSG:INFO: macro0_pin gpio.33:low:pu]
[MSG:INFO: Kinematic system: Cartesian]
[MSG:INFO: Connecting to STA SSID:FRITZBox 7590 VO]
[MSG:INFO: Connecting.]
[MSG:INFO: Connecting..]
[MSG:INFO: No SSID]
[MSG:INFO: WiFi off]
[MSG:INFO: 10V Spindle Ena:NOPIN Out:gpio.32 Dir:NOPIN Fwd:NOPIN Rev:NOPIN Freq:5000Hz Period:8191]
[MSG:INFO: Probe gpio.22]
Grbl 3.9 [FluidNC v3.9.7 (wifi) '$' for help]
[MSG:INFO: ALARM: Unhomed]
ALARM:14
ok
[VER:3.9 FluidNC v3.9.7:]

User Interface Software

WEB UI

What happened?

I have the problem that when I finish the WIFI configuration and my device tries to connect. gives me the error no SSID out. If I look at the SSID in the LOG, I can see that a special character that I had previously entered is missing. I have a Fritzbox and the exclamation mark is missing from the SSID.

GCode File

No response

Other Information

No response